The Federal Aviation Administration is halting the installation of Juniper routers following last week's rare nationwide ground stop, an agency spokesperson confirmed to ABC News on Tuesday.
Friday's hourslong ground stop was issued after the installation of a Juniper router at an FAA facility in Arkansas flooded the network with data, overwhelming an older system and resulting in telecommunications issues, according to officials.
The FAA has not yet determined the root cause of Friday's issue. The installation pause will remain in effect while the FAA investigates the cause, the agency said.
Transportation Secretary Sean Duffy told reporters Tuesday that they had spent a year testing the routers, and that the issue occurred on the 69th installation.
"This was the 69th, and 68 had gone really well," he said. "This was the one that started to behave this way. So we thought it's only prudent to pause the use of these routers."
Transportation Secretary Sean Duffy speaks to members of the media amid Senate policy luncheons at the U.S. Capitol, November 17, 2026 in Washington.
Chip Somodevilla/Getty Images
He said there is a "lack of clarity" as to why the router was able to have this impact on the network, but that the information gathered so far does not point to a cyberattack.
"I promise all of you that when I know what happened with that router, injecting that overload into our system, I will most definitely share that with you," he told reporters. "If we were subject to a hack, we will share that with you as well. But all of my intelligence partners are telling me that wasn't the case."
A traveler walks past a flight information board after the Federal Aviation Administration grounded flights nationwide at Ronald Reagan Washington National Airport in Arlington, Va., Nov. 14, 2026.
Tom Brenner/AP Photo
Thousands of airline passengers were stranded in airports after the FAA grounded all flights Friday due to the telecommunications issue. The FAA said it issued the ground stop out of precaution.
Popular Reads
Duffy told ABC's "This Week" on Sunday that work was being performed to replace outdated copper wire with fiber cables in El Dorado, Arkansas, when the router communication believed to have caused the ground stop occurred.
When the router in that area was turned on, "we saw that in Amarillo, Texas, a system we had replaced about three weeks earlier, that started to flood our system as well," Duffy explained.
The routers from Arkansas and Texas are being examined "to find the root cause of what happened," Duffy said.
The routers are being examined at an L3Harris lab in Florida. L3 Harris is a government contractor that provides technology and IT support for the FAA and that worked with Juniper and its owner, Hewlett Packard Enterprise, to install the routers.
A spokesperson for Hewlett Packard Enterprise said in a statement regarding the ground stop, "Based on what we know and have been told by others, our equipment was working as configured."
"The FAA is assessing the configuration and performance of all infrastructure involved to determine the cause," the statement said.
Source: ABC News · Ayesha Ali, Meredith Deliso
At a glance
- Topic
- World
- Country
- 🇺🇸 US
- Publisher language
- EN
- Added to Allnira